FAQ

GENERAL LUBRICANT KNOWLEDGE

Viscosity is a measure of an oil’s thickness and flow at a given temperature. It determines how well the oil can form a protective film between moving parts. Oils that are too thin may not protect under high loads, while oils that are too thick can increase friction and reduce efficiency.

The first number with “W” (winter) indicates the oil’s flow at low temperatures, ensuring easy starting in cold conditions. The second number indicates viscosity at operating temperature, which affects protection under heat and load.

Lubricants contain additives that suspend contaminants and neutralize acids. Properly formulated oils reduce sludge, varnish, and other deposits that can block passages, reduce efficiency, and accelerate wear.

Oxidation occurs when oil reacts with oxygen at high temperatures, causing thickening, acidity, and sludge formation. Thermal breakdown happens when the oil’s molecular structure degrades under heat, reducing its protective ability. High-quality base oils and additives help resist these effects.

Wet stacking is the accumulation of unburned fuel and soot in diesel engines running at low load for extended periods. Oils with strong dispersant and detergent properties help keep soot suspended and prevent buildup on engine parts.

Thinner oils at operating temperature can reduce internal friction, improving fuel economy. However, viscosity must still be sufficient to maintain a protective film on critical engine components.

  • Mineral oils are refined from crude petroleum; may require more frequent changes and are generally not suitable for most modern engines.
  • Synthetic oils while still derived from crude petroleum, this type of lubricants are engineered for higher stability and better performance under extreme temperatures and stress.
  • Bio-based or plant-based oils are derived from renewable resources,
    offering superior thermal stability, reduced environmental impact, and in Evolve’s case, better lubricating properties than synthetic products.

Using oil with the wrong viscosity, insufficient additive protection, or low-quality base oil can result in metal-to-metal contact, accelerated wear, overheating, sludge formation, and even catastrophic failure over time.

Manufacturer specifications ensure that the oil meets the required thermal, chemical, and load-bearing properties for the engine or machinery, ensuring optimal performance. It has to be mentioned that this recommendations are usually based on normal operating conditions. Extreme conditions can change the engine demands, so always check for additional recommendations in those cases.

Additives enhance oil performance by preventing wear, controlling oxidation, neutralizing acids, suspending contaminants, and maintaining viscosity. They allow oils to last longer and protect engines more effectively.

PERFORMANCE & PROTECTION

Evolve lubricants use a unique, patent-pending formulation built on plant-based base oil, combined with high-performance additives to protect engines and machinery from wear, corrosion, and deposits. Our formulation enhances overall lubrication performance, ensuring reliable operation under all conditions.

Our formulation forms a strong protective film on moving parts, reducing metal-to-metal contact and preventing scuffing. It improves thermal stability, friction reduction, and service life, ensuring optimal protection across all applications.

Yes. Evolve lubricant’s thermal breakdown and oxidation resistance is only comparable to the best in the market, maintains optimal viscosity and protection especially under extreme heat and heavy loads.

By reducing friction and wear, Evolve Lubricants help improve energy efficiency, maintain consistent performance, and reduce unplanned downtime, contributing to smoother operation and better mechanical efficiency.

LONGEVITY & MAINTENANCE

Yes. Our plant-based + advanced additives formulation enables extended drain intervals while improving protection, helping reduce maintenance frequency.

Extended service life means fewer oil changes, reduced downtime, and simplified maintenance planning, having a direct impact on bottom-line results and equipment availability.

Absolutely. Longer-lasting protection, reduced volatility, and extended drain intervals lower total oil consumption, saving costs and minimizing environmental impact.

Disclaimer: When in doubt, always refer to the manufacturer’s specifications and recommendations.

SUSTAINABILITY

Yes. Evolve lubricants are built on plant-based base oils, contributing to sustainability by reducing reliance on fossil fuels while improving product performance. Our products are Bio-based USDA certified.

By using a Carbon-Negative base oil, improving efficiency, and reducing oil consumption, Evolve Lubricants help lower greenhouse gas emissions and overall
environmental footprint.

Yes. Evolve lubricants are Inherently Biodegradable and less hazardous than conventional oils, that applies for soil and water spillages, being safe even for Marine Life.

Yes. Fewer oil changes, lower friction losses, better fuel economy and renewable plant-based base oils contribute to measurable reductions in operational CO₂
emissions.

APPLICATIONS & COMPATIBILITY

Evolve lubricants are suitable for a wide range of engines and machinery, including industrial, automotive, marine, and specialty equipment. All our products are drop-in compatible, meaning that no modifications or flushes are necessary when you switch to Evolve.

Yes. Evolve products are versatile and compatible with multiple engine types and equipment applications, delivering consistent performance in diverse operations.

Yes. Our wide product line and viscosity range, together with the unique formulation, provide the properties needed for demanding conditions across all industries.

TESTING, CERTIFICATION & TRUST

Yes. Evolve lubricants undergo rigorous laboratory and field testing to verify wear protection, thermal stability, and performance. There are plenty of independent test cases available at our customer’s request.

Yes. Evolve products meet and most frequently exceed international standards, including API, ACEA, and OEM specifications.

Yes. Case studies show extended service intervals, reduced wear, improved fuel efficiency, and environmental benefits. Tests have been conducted in a broad range of conditions, from high-performance racing teams in USA, to extreme industrial conditions in Africa.

OPERATIONAL & PRACTICAL BENEFITS

Yes. By reducing friction and maintaining optimal viscosity, Evolve lubricants improve energy and fuel efficiency. This has been measured not only through independent testing, but also real life usage.

No special handling is required beyond standard oil storage precautions. Evolve products are stable, safe to handle, and packaged for retail, industrial and/or fleet use.

Operators can track performance through oil analysis, monitoring drain intervals, and consulting case studies. We provide technical advisory and support to ensure that your engine is being properly taken care of.